# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"CorePointer"
#	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/ttyS0"
	Option		"Protocol"		"PS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection






Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor0"
  Option        "Device"        "/dev/input/event0"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus0"
  Option        "Device"        "/dev/input/event0"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser0"
  Option        "Device"        "/dev/input/event0"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY
EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor1"
  Option        "Device"        "/dev/input/event1"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus1"
  Option        "Device"        "/dev/input/event1"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser1"
  Option        "Device"        "/dev/input/event1"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY
EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor2"
  Option        "Device"        "/dev/input/event2"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus2"
  Option        "Device"        "/dev/input/event2"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser2"
  Option        "Device"        "/dev/input/event2"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY
EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor3"
  Option        "Device"        "/dev/input/event3"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus3"
  Option        "Device"        "/dev/input/event3"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser3"
  Option        "Device"        "/dev/input/event3"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor4"
  Option        "Device"        "/dev/input/event4"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus4"
  Option        "Device"        "/dev/input/event4"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser4"
  Option        "Device"        "/dev/input/event4"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection


Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor5"
  Option        "Device"        "/dev/input/event5"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus5"
  Option        "Device"        "/dev/input/event5"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser5"
  Option        "Device"        "/dev/input/event5"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection



Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor6"
  Option        "Device"        "/dev/input/event6"   # USB ONLY
  Option        "Type"          "cursor"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus6"
  Option        "Device"        "/dev/input/event6"   # USB ONLY
  Option        "Type"          "stylus"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection
Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser6"
  Option        "Device"        "/dev/input/event6"   # USB ONLY
  Option        "Type"          "eraser"
  Option        "USB"           "on"                  # USB ONLY

  Option        "Mode"          "Absolute"
  Option        "Threshold"	"20"
  Option	"ScreenNo"	"0"
EndSection




Section "Device"
	Identifier	"Radeon 9200"
	Driver "radeon"
	BUSID  "PCI:1:0:0"
#	Option "MonitorLayout"	"CRT,CRT"
	Option "MonitorLayout"	"CRT,"
	Option "MergedFB"	"off"
	Option "CRT2Position"	"LeftOf"
	Option "MergexXinerama"	"off"
	Screen 0
EndSection


Section "Device"
	Identifier	"Radeon 9200 CRT2"
	Driver "radeon"
	BUSID  "PCI:1:0:0"
#	Option "MonitorLayout"	"CRT,CRT"
	Option "MonitorLayout"	",CRT"
	Option "MergedFB"	"off"
	Option "CRT2Position"	"LeftOf"
	Option "MergexXinerama"	"off"
	Screen 1
EndSection





#Section "Device"
#	Identifier	"NVIDIA Corporation NV15 [GeForce2 GTS/Pro]"
#	Driver		"nvidia"
#EndSection

#Section "Device"
#	Identifier	"AIW Pro"
#	Driver		"ati"
#EndSection



Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	30-69
	VertRefresh	50-120
	Option		"DPMS"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor 2"
	HorizSync	30-69
	VertRefresh	50-120
	Option		"DPMS"
EndSection


Section "Screen"
	Identifier	"Default Screen"
#	Device		"NVIDIA Corporation NV15 [GeForce2 GTS/Pro]"
	Device		"Radeon 9200"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
#		Virtual  2048 768
	EndSubSection
EndSection



Section "Screen"
	Identifier	"Default Screen 2"
#	Device		"AIW Pro"
	Device		"Radeon 9200 CRT2"
	Monitor		"Generic Monitor 2"
	DefaultDepth	24
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection




Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	Screen		"Default Screen 2" LeftOf "Default Screen"


	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	InputDevice	"Generic Mouse"

#        InputDevice    "cursor0"    "SendCoreEvents"
#        InputDevice    "stylus0"    "SendCoreEvents"
#        InputDevice    "eraser0"    "SendCoreEvents"
#        InputDevice    "cursor1"    "SendCoreEvents"
#        InputDevice    "stylus1"    "SendCoreEvents"
#        InputDevice    "eraser1"    "SendCoreEvents"
#        InputDevice    "cursor2"    "SendCoreEvents"
#        InputDevice    "stylus2"    "SendCoreEvents"
#        InputDevice    "eraser2"    "SendCoreEvents"
        InputDevice    "cursor3"    "SendCoreEvents"
        InputDevice    "stylus3"    "SendCoreEvents"
        InputDevice    "eraser3"    "SendCoreEvents"
        InputDevice    "cursor4"    "SendCoreEvents"
        InputDevice    "stylus4"    "SendCoreEvents"
        InputDevice    "eraser4"    "SendCoreEvents"
        InputDevice    "cursor5"    "SendCoreEvents"
        InputDevice    "stylus5"    "SendCoreEvents"
        InputDevice    "eraser5"    "SendCoreEvents"
        InputDevice    "cursor6"    "SendCoreEvents"
        InputDevice    "stylus6"    "SendCoreEvents"
        InputDevice    "eraser6"    "SendCoreEvents"
EndSection


Section "ServerFlags"
	Option "Xinerama" "false"
#	Option "Xinerama" "true"
	Option "Clone" "off"
EndSection



Section "DRI"
	Mode	0666
EndSection